The basic function of the inner wire pliers is to tension brake and derailleur steel cables. It is used for holding the inner cable and pulling it out of the housing. The safety lock is activated with a thumb push. The pliers can now be released and the cable fixed. The lock is automatically released by squeezing handles together. The additional safety lock enables easier, faster and more
A worn chain shifts poorly and causes undue damage to the sprockets. The tool is a go no go gauge designed to accurately indicate when a chain is worn out.Made from precision laser cut steel.Measurement: 00.6% = no chain wear. 0.71.2% = the chain is worn out and it is necessary to replace it.
Unior Sprocket Wear IndicatorThis tool can be used to check the wear of 12-21 tooth sprockets. This had typically been difficult to measure accurately. Worn cassette teeth will quickly wear out your chain and create issues in shifting or the ability for the chain to stay in gear The chain is put on the sprocket and the tool placed with its round end between two teeth on the upper sprocket side.
Introducing the Unior Tools Chain Checker, essential for general maintenance to make sure your bike runs smoothly every time you use it. To alleviate poor shifting and uneven drive chain wear, most manufacturers recommend chain replacement at or before 0.6% stretch. Now you can quickly and accurately determine the wear and stretch of any chain. Simply insert the chain checkers pins into two links,